Voodoo Lab

I have the control switcher built in 2013, with the black buttons... have it switching channels just fine... just need help with the effects loop, I want it on permanently... and just add and remove the effects via my fractal ax8 when needed.... any guidance would be appreciated.... thanks!

I just tested a Ground Control Pro programmed the same way using a MIDI Monitor and can confirm that the proper Control Change message is being sent with every push of a Preset button. So this is a real head scratcher. 1. What MIDI Channel are you using for the D-Two? 2. What is the MIDI cable path...

What MIDI Channel are you using for the D-Two? What is the MIDI cable path from Ground Control Pro MIDI Out? What are your other Instant Access buttons set to? Also, as a test, try setting the Program Change for the D-Two on these two Presets to "--" (type either "00" or "128") and save that way. T...

What MIDI Channel are you using for the D-Two? What is the MIDI cable path from Ground Control Pro MIDI Out? What are your other Instant Access buttons set to? Also, as a test, try setting the Program Change for the D-Two on these two Presets to "--" (type either "00" or "128") and save that way. T...

Only one Instant Access button should be set to use Control Change 20... having both of them set the same could be what is causing some issues. For instance if one is programmed to be On with a Preset while the other one is set to be Off, the Ground Control Pro will try to send both messages at onc...

Only one Instant Access button should be set to use Control Change 20... having both of them set the same could be what is causing some issues. For instance if one is programmed to be On with a Preset while the other one is set to be Off, the Ground Control Pro will try to send both messages at onc...

Is the next preset in your example programmed to "enable" Bypass? Once you turn on "Transmit with Preset" for the Instant Access button controlling the Bypass, each preset will either activate or bypass the D-Two. It is a decision you have to make when creating each preset... "should the D-Two be O...

If you set the two Instant access buttons to "Transmit with Preset" then you will be able to program them to send the appropriate Control Change data when recalling a preset. Simply recall a preset, press the Instant Access buttons so they are in the desired state, then go into the Edit Mode and ex...

Using the GCP to control an Eventide H9 and a TC electronics D two rack delay. I figured out how to set cc's to 2 of the 3 open instant access switches I have available in the 4 preset 8 IA mode. My question now is, while setting up presets, is there a way to configure a preset, with the H9 and Rack...

The Pedal Switcher does not do stereo routing. The GCX can actually be converted to stereo. A single Stereo Upgrade Board will convert four of the loops (we usually do this on loop 5-8) to stereo using TRS jacks. I am not too sure you need to do this however since the stereo pedals we know of so fa...