Voodoo Lab

This is what you need to keep your plugs from falling out during transport etc...

You bolt this right into the side of your rack (on the inside):

I made a loom and then zip-tied an extension cord to it. I have never had an ounce of interference.

The 9v comes from a cheap pedal power supply from ebay. Works like a champ!

I never, ever use batteries because they fade at different rates and can be corrosive.

Jim

Rock Of Salvation Band

Intuitively, you would think that the tap tempo button would be momentary. However, it works in the normal mode. Ignore the state of the led light on the IA button regarding your tap tempo. It will illuminate on/off depending how many times you tap it. That said, the time locks in place either way.

I am running a GMAJ2 with my GCP and GCX. I also have an NS from Boss. However, I am not using my Boss Noise Gate. The GMAJ2 has an onboard noise gate that is awesome! I have removed a lot of noise by adjusting the parameters (EQ/Noise Gate on the left of the GMAJ2 panel). When you are in the Noise ...

The problem was the USER. I mis-programmed my wah to IA 1 (which is where I wanted it) but did not change the cables or remove the previous IA that had the wah on IA 6. Problem solved! This experience had me review the manual and remember that I can control expression (switch) inptus on my stomp box...

OK< I am having a problem... the GCX shows loop one is activated but the Ground Control Pro light is not on. I hit the IA on the GCP and the light comes on for the GCP...-but the light remains unchanged on the GCX. Also, the loop is intermittent in terms of actually working (even though the GCX ligh...

I have removed my 2nd expression pedal and am going with one EB jr... I have added a Morley Wah in its place... This is due to space constraints on my board. I have established a harmonizer setting on my G MAJ 2 and renamed it: harmonizer. Clever, huh? lol So, what I can do is setup one of my preset...

I set up instant access button-8 as my tap tempo on the GCP (some like to use instant access 4 but I can't reach that one as easy as I can for instant access button-8). You look in the G MAJ 2 parameters to see what the tap tempo cc# is. Then, assign the instant access button of your choice to the s...

Does anyone have their GCP and a GMAJ 2 setup to be harmonizer with an expression pedal? If anyone has the parameter settings for a good harmonizer effect that can be accessed with an expression pedal, please let me know what those parameters are...

I reversed the cabling for mine (opposite from one another) and they are now working... I can't explain why mine work in this fashion but they do... I am using Ernie Ball VOL Jrs for both pedals...