Voodoo Lab

Hi John,

yes, those are power supply racks.

It´s a homemade rack building...

This picture is old...



I will soon present a photo with the new configuration of racks.

Thanks.
Regards.

Thanks John for your help!! http://www.esnips.com/nsdoc/b5a49a5c-602e-408b-91b3-3898a9661c9d Now, 8 switch of GCP #1 controls 8 loops of GCX #1 and GCP #2 controls GCX #2. So now what I need is to program the presets... :? I hope that this way is now easier. About one week of work... POWER SUPPLY!!!...

"does the Ground Control Pro power up with the power supply when no MIDI cables are connected to it?" Oh man... Yes, I´ve fixed it. Change the power supply. Two GCP works. Sorry John. The power supply tricked me because it worked with 5 pin midi cable when I did the test... one step done. "1. Press ...

The point is that a GCP which is connected with the GCX works, and the other GCP is off, even with power supply.

and vice versa... changing units.

Both units works but together not.

The GCP connected to the GCX works and the other is off, always.

I'm blocked man...

Some photos explanatory... This is how the GCP are connected... http://www.esnips.com/nsdoc/7fe63b5b-8aa0-4ff3-b70d-afd8dbaae18e Changing the connection GCP... http://www.esnips.com/nsdoc/4c8a2893-0c7a-42c8-96c7-332bb75cee46 As an example here I try another Midi Looper... http://www.esnips.com/nsdoc...

What is the power supply you are using? It should be 9V AC and at least 500mA for the Ground Control Pro. The power supply I´m using is the same that Ground Control Pro brought. It is as if the "Midi In" of Ground Control Pro was not activated, therefore, does not activate the "Midi Out" of second ...

First of all, thank you very much John. The Power Supply is working. I tried the GCPro with a other MIDI Looper and it worked. With the power supply only in GCPro, GCPro will not turn on. It have to have one unit midi with the midi cable connected. Some mates from U2Sound-Forum said that... about co...

Hi,

Both Ground Control Pro work well alone, the problem is to combine the two units, both work together.

Thanks.

John, I did as you tell me... http://www.esnips.com/nsdoc/4361211e-bedb-45f5-8f0c-1b8534345c8b but... the GC 1 is off and it has external supply. I don´t know about conection of 2 Ground Control Pro. Ground Control Pro 1 is 1.13 version and second is 1.11 version. GCX Switcher led Active works when ...

Hi,

I tried as you told me, John ... one Ground Control Pro is on but the second Ground Control Pro does not turn on.

Just turn on the Ground Control Pro that goes directly to the GCX Switcher... second GC Pro is off.

The second Ground Control Pro have a power suplly and the unit is off.

Thanks.