Voodoo Lab

Thanks John. I figured the issue was actually with the DD500 and not the GCP, but I wanted to check here before I ditched the DD500. You had actually helped me out before on this and I took the advice to up the mA from the phantom power of the HEX to implement the MIDI splitter. That was great advic...

I'm running my GCP with the following MIDI chain GCP> Midi Solutions Thru (2 way splitter) Out 1.> Hex > Source Audio Reflex > Source Audio Hub _____________________(2 way splitter) Out 2. > Boss DD500 > Mesa Triple Crown 50 Everything but the DD500 works fine. The issue being that randomly the DD50...

Thanks for the quick response! Would this current doubler cable have been included with the cables that came with my Mondo (bought new)? Also, can I use two of the 9/12V(set to 9V of course) 400mA port = the ones that aren't isolated from each other.... or do I need to use the two isolated (non swit...

I'm having trouble with my MIDI daisy chain and want to add a MIDI splitter / thru box. The model I'm looking at is this from Midi Solutions...http://www.midisolutions.com/prodthr.htm This device draws its power from whatever is connected to its MIDI in. The literature seems to indicate its draw is ...

I recently completed this PT Novo 24 build thanks in large part to Voodoo Labs gear. 285 presets? Surely you are joking you say! Well, sorta...let me 'splain. In this modern world of MORE! MORE! MORE! NOW! I wanted to provide a good title and "Bigger is better" and all that.... I'm definitely presen...

Fixed! Some oddness to it though, as always... MIDI comm. channels were set correctly on all devices and DD500 was not in Omni mode. The root cause of the issue seems to be that I added things after I made some presets. When I first got the GCP I setup presets 1-16 in IA mode with the gear I had at ...

Thanks for this John, I'll confirm the Rx channel and move it up the line before the amp and hopefully that will solve it. I'll post results either way.

I'm hoping someone can help me figure out what I'm missing here. I'm using a GCP to control a bunch of gear. The problem I'm having is that the last box in the MIDI chain responds to the GCP during preset creation, but does not respond on preset recall. I'm using GCP in 4 preset per bank mode with I...

Voltage doubling cable used with Mondo "Sag" taps confirmed good. I purchased the Voodoo Lab voltage doubling cable and used the two voltage "Sag" taps which are adjustable from ~ 4.0 - 9.3 V and got the Good Vibes to work.... but it was interesting. I did not get any wet effect until I had adjusted...

The Good Vibes does not have a battery option, so it's in a different category. Thanks for these recommendations. I contacted EHX tech support directly and they confirmed that the "Good Vibes" will not work using the Mondo's 9.0V taps. It's not an issue of amperage as the pedal only draws 45mA. Belo...