Voodoo Lab

Are you saying you have to unplug 1/4 inch cables from the back of GCX of those loops that you do not need for each preset? I am kind of in similar situation as I cant figure this one out. No cables need to be unplugged... He is saying that he has found that the ES-8 has the ability to program up t...

John Clark I thank you very much,

Are you saying you have to unplug 1/4 inch cables from the back of GCX of those loops that you do not need for each preset?
I am kind of in similar situation as I cant figure this one out.

Hi there
Is there any way to switch 2 channel amp without using 2 loops of GCX?
Is it possible to use only on loop?
Thanks

Thanks Jon.You are the champion.
Onother question.
Feed thru at rear will not mute signal if i get tuner there am i right?

Up the Irons !!!

Hi there I am running all of my pedals through GCX/GCP and recently I found out i need an extra loop. So I was thinking to get volume pedal and put other pedal in place of my tuner. That volume pedal has tuner out. So if I get my tuner connected to a volume pedal then hooked to my Ground control Pro...

Does HUB needs to be listed under devise on GCP?
Pedals are by factory default on channel 1 do I have to have hub on channel 1 too?
Or I have to set them up all on different channels
Thanks

OM is Orbital modulator.
When I mention MIDI I thought about that button that is on the pedal I set on MIDI.

I think I see what is happening here! You already have the Ground Control Pro set up to control the Orbital Modulator and the Dimension Reverb independently. If you want to use the Hub to control the pedals as Source Audio Jon is describing, you would want to name the Hub as the only Source Audio d...

Yeah JohnClark can help for sure
GCP is set up for 4 presets on the bottom row
I also have set up;
Sourceaudio-Orbital Modulator assigned to channel 1
Tc Electronic-Nova Drive assigned to channel 2
Sourceaudio-Dimension Reverb on channel 3

Up the Irons !!!