Voodoo Lab

John, per our conversation, I checked all connections & ran continuity checks to look for broken traces. I couldn't find any ( doesn't mean there aren't some ), reassembled & again re-initialized.....still no midi out. I guess I'll have to send the unit in to you.

Did this start failing after installing the upgrade chips? If so, open everything up again and carefully check that all the pins inserted into the socket properly. John, I can't confirm that it worked before the upgrade.... I had just gotten it and ordered the upgradechips before I ever tried to us...

If in doubt, try re-initializing the Ground Control memory. This will clear any settings and make all the presets send a program change message on MIDI channel 1. Let us know what happens. Hi John! I re-initialized unit twice with no success in sending midi program change. I had the Fc-200 connecte...

I recently purchased a ground control (not Pro) & purchased upgrade chip & memory. Everything seemed to install fine so I set up unit for bank 4 mode & defined devices and midi channel. The ground control is apparently not sending any midi at all... program or ia messages. To confirm that the proble...

John, no I do not have the GCX. In an early post, I thought I was going to win the auction for it, but didn't. That is why I am asking how to power the ground link. Please let me know & thanks for your help.

John, the manual only discusses using the ground link in conjunction with the gcx. I don't have that... I just want to have more switches available for sending on/off, etc. Can I do that with the groundcontrol & ground link? If I can, how do I power the ground link?

I recently picked up an old Ground Control but no power supply. I know it says 9vac on the back, but doesn't give the mA. Also, does anyone know if it would be ok to use a supply rated 10vac @ 500mA? Thanks Guys!

I have an old ground control w/ ground link and gcx. Can I use the ground link to control additional effects on/offs on AxeFx or to control rc50 looper etc. ?

Just purchased an old ground control w/ ground link & gcx. 1. How do I find out what version the software is?