Voodoo Lab

Can anyone assist with the HX effects issue being controlled by GCP?

I want to run my Ernie Ball volume pedal after my drives in the GCX. How do I do this without running long cables from the out of the last loop used to the volume pedal then back to the input of the GCX for the modulation? Simple option is to do that but use a buffer or two to compensate for signal ...

Is it possible to control the HX Effects with a GCP 8 IA Buttons for the 8 blocks 4 Snapshots Up & Down to change presets Also suggestions for a power supply for the GCP. I have a GCX which powers it usually with the rack system but want to use it on it's own with the HX Effects. Is it possible to h...

I understand I will have to change the midi channel on the 11R to an unused one

Hi Guys, I have the GCP and GCX. It is setup as 4 banks and 8 IA. Can I also use the same GCP to control an Avid Eleven Rack system but using some of the used banks and therefore use the IA buttons associated with the 11R within those banks. And not have to reconfigure when I switch from using the 1...

I recently got the Ground Control Pro and GCX and it works great with the 8 effects I'm running through the GCX and the 8 IA buttons. I want to add an additional midi controlled looper (something like the Disaster Area DPC-8EZ (GCXs are hard to find here in South Africa but if I can find one I'll ge...

*Update*
I have configured the GCP with the presets and the IA buttons working. Just need to figure out how to assign a patch change via midi to the TC Electronics for each preset.
Any ideas?
Thanks

Hi Guys, Further to my above question. I have decided to go with the 4 Presets and 8 IA buttons Here's another stupid question... Can you assign a IA to change a patch on the TC Electronics GMajor and when you press the assigned IA button it turn that effect on or off? So each preset will change the...

Hi Guys and Gals. I'm brand new to midi and rack switching. I just got a Ground Control Pro and GCX. I'm sure it mentions it in the manual but I'm not 100% sure. Here is the plan I want to implement. Buttons 1 - 6 on GCP activate loops on the GCX Buttons 7 - 0 & the other two "Preset" buttons to swi...

Greetings guys and gals, I'm currently using the GCP and a TC Electronics Gmajor 2. The GM2 is running through the effects loop of my amp. I currently have my drive pedals on my board going directly into the front of the amp. I want to add the GCX loop system so that I can control additional pedals ...