Voodoo Lab

ive done the gcx route (2 of them at once) and now im doing the pedal switchers w/commander and i recomend the latter... the gcx has basicly only one advantage, you get more presets with a ground control. with a commander you only get 10, BUT you get basicly access to all those 10 at once,, because ...

The hum is (was) a result of a ground loop. Once you lifted the audio ground to one of the amps, you eliminated the ground loop. Lifting ground on one of the audio cables, as you have done, or adding an isolation transformer before the front end of one amp are the two usual solution choices. Good L...

cool setup...

are you using two amps 2 a/b?

... i have a very similar setup.. with 3 pedal switchers and a commander, although i put all 3 pedal switchers across the bottom, so i dont have to step over them.

ill post it.

well i think i solved it, sort of... just on a hunch, dont know why, i tried cutting the ground connection on one end of the guitar cable going to the marshall amp, and 80-90% of the hum was gone. does this make sense? id love to know why this worked, and why this hum is there to begin with. cause i...

Have you tried just a single pedal switcher with nothing but the two amps to see if anything changes? Just guitar, pedal switcher, amps. Dom yeah, i unplugged everything else from the pedal switcher. even the power of the pedal switcher. and the hum is there on the first amp(soldano) even if its se...

i just wired up my 3 pedal switchers with comander. im using the last loop of the 3rd pedal switcher to switch between amps (soldano and marshall, one set to clean, one set to dirty) everything is fine when using just the soldano, but when i plug the cable going to the second amp into the OUT of the...

hey guys, anyone who has some info feel free to chime in... i have a pedalboard that im assembling, with the following pedals... dunlop jerry cantrel wah boss rc-2 loop pedal skinkontrol push/pull octafuzz (vintage) req. 9v battery only vintage boss bf-2 flanger digitech whammy pedal EHX pog 2 empre...

i hear you

hello, ....john c. if your here you'd probably have some ideas for me on this, you helped me a few times before with my gcx rig diagrams.... firstly, i just sold my axefx and went back to all pedals... i have a gcx which i use to control my digetech whammy pedal, and i have all 8 loops used with pe...

i bought the same preamp from L&M in edmonton as well. has it been more than 30 days? you should be able to return it.

its hard to tell from what youre saying what is exactly going on.