Voodoo Lab

That is a lot of noise gating! Will you be using the Effect Gizmo to provide power to a foot controller? I'm using a Mastermind GT and Switchblade 8F and a bunch of stompboxes all powered by a Pedal Power 4x4. The rack also has an Axe FX with it's own kettle supply so really i just want to try and ...

The Magnum 44 does draw a rather large amount of current, so it will continue to use its included power supply. I think the best bet would be as you mention, a Pedal Power AC for the Effect Gizmo and Decimator Pro Rack G. This may also have you covered if you are using the Effect Gizmo to provide p...

Hi Is there a Pedal Power box that can power both the RJM Effect Gizmo (9 volt AC or 12 volt DC) and the EHX Magnum 44 (24 volt DC!!!)? I'm guessing the Magnum 44 needs too much power. If not, is there a Pedal Power box i could use to power the Effect Gizmo, an ISP Decimator Pro Rack G and an RJM Mi...

For the 18V Mothership, you would need to use a Voltage Doubler Adapter connected to two of the High Current 9V outputs. Now 5V is back to the original story... there isn't really a convenient way to get that. What exactly are these MIDI boxes? Thanks again John! The Midi boxes are a Kenton Midi US...

Also had another question...

Could i also power 2 Midi boxes that take 5v DC as part of this setup?

There isn't really a convenient way to get the 48V (according to the manual ;) ) that the Mothership requires. Unless there is an 18V version (web site says it is 18V :? ), I think you'll have to use it's supplied adapter. I hope that helps! Thanks John. I have a Mothership that has been updated to...

Hi there

I am currently running a 4x4 to power the following:

Soundsculpture Switchblade 8F
Pitchfactor
Superego
Dead Horse Deluxe Overdrive

Would the 4x4 be able to power the Mothership as part of this setup?

Hi folks I have a board consisting of the following: Soundsculpture Switchblade 8F (250ma minimum at 9VDC either polarity, 2.1 mm plug) Eventide Pitchfactor EHX Superego (140mA at 9VDC with a center negative plug) Boss Tuner Boss OC3 Empress Para Eq (Boss) Will the Pedal Power 4x4 power the whole bo...

Above you see that we are successfully powering the Factor pedals without issue. I am running both a Timefactor and a Pitchfactor plus a Boss NF-1 and RJM Mini Line Mixer in my rig with PP2 PLus with no problems. I use inputs 5 and 6 both with red barrel Line 6 style cables and both set to the ON p...