Voodoo Lab

I am cleaning up my pedal board and want to get rid of the old power stips and wall warts. I currently have: - Ernie Ball Volume Jr. (no power needed) - Boss TU-2 tuner - Boss PW-10 VWAH - Fulltone Fat Boost 3 - Barber Tone Press - Ibanez TS-9 Tube Screamer (original) - Ibanex TS-9 Tube Screamer (r...

Just got this email directly from Terry at Strymon - "All of our DSP based products consume right around 200mA so they should operate on your PP2+ outputs 5 or 6 with the DIP switches in the normal position." This means that either output 5 OR 6 with the corresponding DIP switch in the "Normal" pos...

puritycontrol wrote:Wow thanks Jon. That is the best response I"ve ever gotten on a forum!

You came to the right place!

I have a pedal power 2 plus lab and am currently using 9 boss pedals. any idea where I can get some sort of splitter cable to run two pedals into one jack on the lab? bigmike bigmike, You can get a Y-split adapter from a Voodoo Lab dealer (such as myself) or from Voodoo Lab directly. It's basically...

Yes Jon, I was referring to only the order of the MIDI chain. Thanks for the reply! Xavier The audio connections would be to connect the Out of the first Pedal Switcher to either the Input or the Buffer of the second Pedal Switcher. The MIDI Connections would be to MIDI Out of the Commander to the M...

The audio connections would be to connect the Out of the first Pedal Switcher to either the Input or the Buffer of the second Pedal Switcher. The MIDI Connections would be to MIDI Out of the Commander to the MIDI In of the first Pedal Switcher then connect the MIDI Out of the first Pedal Switcher t...

Not at all..thanks for the tip. Xavier not to hijack this thread or anything, but I have both the timefactor and modfactor units and you also have the option of using each units incoming program map. which can be used to map an internal preset to an external program change. which makes dealing with ...

The Commander will send MIDI Program Changes 1-10, corresponding with Commander Presets 1-10, on MIDI channel 1. To control more than one Factor pedal you will need to configure the first one's MIDI Out as a MIDI Thru and write the presets in each unit so they both come up with the desired sound wh...

What Mr. Wilder didn't know when he answered this is that we have actually had the Boomerang III here for testing and have confirmed that it in fact does work with the Pedal Power 2+ when using the Current Doubler cable on outputs 5 and 6 switched to the Normal position. Awesome! Thanks for confirm...

I modified PedalTrain Mini (FuelTank Chameleon power supply underneath) for a customer from France who requested this pedal in his signal chain. He confirmed from Mike at Boomerang that 500mA 9vDC will work. "Mike said DC 9V 500mA is fine." We ordered a custom parallel Y cable (current doubler) from...