Voodoo Lab

Hi John, I am aware of those options and understand how to program as such. But I need more flexibility to program the first row of buttons. Any chance this kind of flexibility is being looked into and will be available with a new firmware update? And speaking of a firmware update, when will the nex...

I too would love to have an update for the GCP with some other options for button configuration. A new update would be Awesome! Any news John?

I play outdoor gigs and when the Sun is shining I can't read the display. Is there an optional display that can be purchased / swapped with the factory one that is readable under sunlight?

Any way to configure the Ground Control Pro so that the bottom 4 buttons instead of sending program changes send CC midi changes for stompbox mode? Then configure the Top 4 buttons for Program change?

Flipped the switch under the treadle and it works fine now.
Thanks!

Will test it out.
Thanks for your time and help!

For clarification: for the treadle to work correctly let's say connected to Pedal 1 Jack on GCP, it should be wired so that when I move the treadle, the Current Value sweeps from 000 to 127? And then I would need to swap the tip/ring wires on the jack on the EP11 for the under toe EP11 switch until ...

I will try flipping the EP11 under treadle switch tonight and see what that does. What's interesting about this is the footswitch under the toe on the EP11 is simply an optional switch kit that I installed in the pedal. And it is fully independent and not wired to the treadle potentiometer. They are...

I am using the aforementioned in the subject line. On the EP11, I have the treadle/pedal jack connected to Pedal 1 input of the GCP and then the under treadle toe toggle off/on switch connected to Pedal 2 input of the GCP. I have enabled (set to ON) both pedals under the GCP Setup/Pedal menu. In a g...

Thanks for the reply.

Are they dymo labels easily removed? And do they leave any residue?