Voodoo Lab

Yea, part of this change will be that to hear the delays, the FX Loop will need to be activated. Try it out and let us know how it goes. there was nothing wrong with your setup in the first place so if what I suggested doesn't work for you, I can take it man! \m/ :ugeek: \m/ I will. Thanks One more...

Here you go... US_Rig_Diagram_2.jpg John, Thanks for the reply and diagram. Appreciate that. I will try this out. Just FYI, I had Ch.2 of the decimator in the loop of the amp (and assign only to Ch.3).Since I use that channel as the main crunch tone and to cut out any noise. All other channels has ...

The setup looks good to me! I suppose if you wanted to just try something different, you could run the delays in the FX Loop of the amp after the Decimator Ch. 2, so the gate doesn't chop the delay repeats. Here are the changes to make that happen... 1. Run the Out of GCX Loop 6 to the Instrument I...

Hey all, Attached is a photo of my rig. I'm going to rewire the whole thing. I had a tech wired it with monster cable. Don't like them as they are too thick and bulky. And the connectors are not that great. Here's how it's wired. In this order 1). Line G90 Wireless 2). Multi Selector 3). Strobe Tune...

1. Press both Setup buttons on the GCP to enter setup mode then press button 2 for Device Name/Channel. Name your G Major 2 and set it to the MIDI channel you want to use and save. . .I use channel 1 for my G Major. 2. Go to your G Major 2, press MIDI then set the channel to match the GCP and save....

http://i95.photobucket.com/albums/l147/punkerted/DARig7.jpg http://i95.photobucket.com/albums/l147/punkerted/DARig4.jpg http://i95.photobucket.com/albums/l147/punkerted/DARig3.jpg http://i95.photobucket.com/albums/l147/punkerted/DARig2.jpg with 2 Mesa Boogie 4X12 cabinets with vintage 30's.