Voodoo Lab

Oh ok. I get it now. Make total sense to me. Actually, I've revised my goals for using the AxeFx-II. What I wanted to do was going to require I use a 4 Cable method to route signal correctly for my AxeFx-II unit. It was getting way more complicated than what I actually didn't and I'm already nervous...

Ok. Here's the latest diagram with my solution to combine feeds from my JS-2400 or my EVH or the mag pickups on my strat with the piezo output running through the Book simulator in Loop #7 on the lower GCX. Nyteowl: I looked back through your post and the warning you gave me about the setting for lo...

Thanks for all your help with this. I most likely will use either a Palmer Duetto or similar type device to merge the two signals into the Blackstar. Also, I found having a noise gate coming out of my amp effects loops was very beneficial for preventing squeal before sending to my effects loops chai...

Nyteowl: Awesome help! Thank you very much. I've made a couple of changes, but first I wanted to elaborate on how I will use my guitar/amp combinations. 1. EVH Wolgang - Want to be able to run that through either amp 2. Ibanez JS-2400 - Want to be able to run that through either amp 3. Fender Strat ...

Thanks nyteowl, I've incorporate some of your suggestions. I researched in the manual and found GUITAR IN - buffered feed thru to the GUITAR OUT on the rear panel. Also normals to the FEED THRU on the rear panel for splitting. So I hung the tuner off of the port.... Also I thought of doing something...

Ok. So here is my first crack at the "amp front side" of this setup. I'm working on the effects loops integration for both amp separately. I want to be able to use the both my AxeFX II and my GMajor II in either amp's effect loops while maintaining the noise gate for each loop. That part I'm scratch...

Good points! My current GCP setup has the top eight buttons as IA buttons and the bottom four and song presets. However, I haven't used this playing live as of yet. What I was doing before in a live setting was the 10PRST/BANK option. Then each button corresponded to a song or part of a song I my ba...

I'm building a new rig and could use some feedback. I have a Ground Control Pro and a GCX switcher I've been using for some time. I also have a second GCX switcher I'm not currently using... I have two amps. 1. EVH 5150 Mini 50W 2. Customized Blackstar HT-Stage 60 w/RJM gizmo for MIDI switching.. I ...

Thanks. I did notice the description was wrong AND I figured out that Loop #3 and Loop #8 work together. I also realize I needed to use IA button #8 instead of #4 for the Whammy since I wanted to bring the Pitchfactor in and out of either Loop X or Loop Y.. THanks again for your help. I would have n...

Thanks for speedy and detailed response. I think I understand your suggestion and have implemented it on paper in the revised diagram below. I had forgotten that GCP IA Buttons and GCX loops are only loosely "coupled". So that indeed frees up the two GCX loops you say I need. So now as you state the...