Voodoo Lab

Well the cheapest and easiest way to power those three pedals is with an ISO-5. Echolution 2 needs 18V Flint needs 9V high current (400mA output) Stereo Electric Mistress needs a current doubler into the two 9V's to get 200mA. Otherwise you could use a PP Digital but you'd need a voltage doubler for...

The ISO-5 fits just fine. If you're thinking about getting some more pedals, I'd go with the Pedal Power 2+.

EHX Slammi - normal output EHX Cathedral Stereo Reverb - output 5 or 6 on PP2+, requires ~200mA EHX Pog 2 - output 5 or 6 on PP2+, requires ~180mA Boss DD-20 - output 5 or 6 on PP2+, requires ~200mA Boss TU-3 - normal output MXR M-108 Ten Band Graphic EQ - requires 18V, voltage doubler, normal outp...

As long as you don't exceed the rated output, it should be fine. Make sure all the pedals on the one output are the same polarity, ie. centre-negative.

Looks great. Question: I know you can run the standard 9v battery devices through it. There are less ports than the PP2+, but considering that you can run up to 400mA of draw on each channel, that should mean I can daisy chain some low draw pedals on one port and still have the rest available for t...

No it won't damage the pedal. As long as the output mA is higher than what the pedal uses, it's fine. A "high-current" 400mA output won't damage a 5mA distortion pedal.

Which EHX Memory Man

Yes, you need to combine outputs 4+5 to get 350mA with a current doubler. Alternatively, you could plug it into the rear AC outlet on the PP2+.

I'd get the 4x4. Daisy chain the tuner with a dirt pedal. The Eventide only uses <400mA.

Yes, with a current doubler or plugging it into the back AC outlet.