Voodoo Lab

Thanks John, your informations are always useful!

Hi there, I have 2 GCPs both with V2 beta Eprom. The first GCP is set to 10 presets linked from midi out to midi in to the second GCP set to IA 12 which send midi out to GCX (as suggested in Matt's post > Thanks Matt!) The problem is that they don't seem to talk to each other and, moreover, there is...

Thank you so much John.
I didn't realize that the GP didn't have the Midi In (also because it's difficult to use), ... oops

Hi there,
I have both a GC and a GCP and I was wondering if they can work together via link.
My question is related to the fact that having two different operating systems, maybe could possibly be damaged?

Thanks.
Luca

Wow! What can I say, thank you very much and I thank the whole Voodoo Lab team. I'm your loyal customer, not by chance I'm the owner of: 1 DMC System Mix plus (very rare here in Italy) 1 GCP 1 DMC GC 1 GCX 3 Pedal Power Digital 3 Pedal Power Plus 2 1 Pedal Power ISO 5 2 HEX Thanks again John. Best. ...

Are you serious or are you kidding me?
Will you give me the chip for free !?

Forgive me man but the GC manual why it says the opposite? http://voodoolab.com/manuals/gc_origv2manual.pdf The Ground Control can control up to 4 GCXs to provide any combination of 32 audio loops and switches. To control GCXs from your Ground Control, they must be enabled here. After entering Setup...

Hi, I'm a happy owner of a DMC Ground Control (firmware 2.4) as well as a very happy owner of the extraordinary Ground Control Pro. I have a problem to solve, the DMC GC only sees one GCX looper switcher but only ONE!, so I can't add more GCX or other loop/switchers like HEX or GRX4. With the GCPro ...

Hi, after trial and error I finally solved! The mistake was in the pin 3 which was grounded with pin 2: the cable is short-circuited somewhere :/ I bought a new cable, now I'm happy. Thank you so much for the courtesy and helpfulness ! ! ! ciao. Luca The Active LED on the GCX should flash whenever t...

The Active LED on the GCX should flash whenever there is MIDI data hitting the MIDI In... do you have any other MIDI source to attempt to send any MIDI data to the GCX? I tried with keyboard (Yamaha DX7 > to GCX) and it works, the Active led flashing...! What could be the problem? GCP ...and then a...