Voodoo Lab

That's very strange. Do both outputs 5 and 6 display the same issue? Do you perhaps have a current doubler cable you could use to combine 5 and 6 ?

So you want a daisy chain cable, Part# PPAV . Leave the output at 9V, and just remember that these two pedals will no longer be isolated.

Hope that helps.

Output 5 or 6, DIP set to NORMAL, that should work.

Hope that helps.

Should be fine. I have 1 GCP with 2 GCXs with a BOSS processor with something else i can't remember off the top of my head right now.

Just get the channels, etc right.

Should be fine, I have a fuzz on top of mine.

How is your board set up? Are you daisy chaining or using different power supplies for the pedals and switcher?

You can take a look at making your own cable through Voodoo Lab: http://www.voodoolab.com/shop/index.php ... vkam60vqr3

The venting shouldn't have an issue as long as you're not driving it to the absolute max. Mounting it wherever it fits should be fine.

If you have the TS9 plugged into you pedal chain, but powered with a 9V battery only, does the hum go away?

Well the AC powered pedal can't be powered with a normal Pedal Power, and for all the others, since you have a lot of digital, high current pedals, I would recommend a 4x4.

Hope that helps.