Search found 8 matches
- Tue Aug 26, 2014 9:20 pm
- Forum: Racks, Switching Systems and MIDI
- Topic: Need help in figuring out my options
- Replies: 4
- Views: 3946
Re: Need help in figuring out my options
I would start by trying the Wah in loop 1 of the first GCX; run send/return cables from the GCX out to your wah on your pedal board. For the volume pedal, I'd do the same but run the send/return cables between the last GCX loop you are using for effects out to the volume pedal and back to the amps i...
- Tue Aug 26, 2014 9:03 pm
- Forum: Racks, Switching Systems and MIDI
- Topic: GCP & GCX & GMAJ2 & MESA MARK V problem
- Replies: 5
- Views: 7057
Re: GCP & GCX & GMAJ2 & MESA MARK V problem
1. Press both Setup buttons on the GCP to enter setup mode then press button 2 for Device Name/Channel. Name your G Major 2 and set it to the MIDI channel you want to use and save. . .I use channel 1 for my G Major. 2. Go to your G Major 2, press MIDI then set the channel to match the GCP and save. ...
- Wed Aug 06, 2014 3:57 pm
- Forum: Racks, Switching Systems and MIDI
- Topic: can the ground control be my "favorite switch"
- Replies: 6
- Views: 6244
Re: can the ground control be my "favorite switch"
I realize this is an old thread but I just found it and have to say thank you to JohnClark for the perfect solution for using my El Cap with the GCX!
- Wed Dec 12, 2012 8:13 am
- Forum: Racks, Switching Systems and MIDI
- Topic: GCP, Pedal Switchers, M9 and Timefactor
- Replies: 5
- Views: 4018
Re: GCP, Pedal Switchers, M9 and Timefactor
Solved! :mrgreen: I had to rearrange the order of the M9 and Timefactor in the MIDI signal path. It seems as though the Timefactor was not receiving messages through the M9 but the reverse seems to work fine. I had to set the Timefactor MIDI OUTPUT to THRU but its all working now. I'm seriously impr...
- Wed Dec 12, 2012 6:05 am
- Forum: Racks, Switching Systems and MIDI
- Topic: GCP, Pedal Switchers, M9 and Timefactor
- Replies: 5
- Views: 4018
Re: GCP, Pedal Switchers, M9 and Timefactor
I did have one bad MIDI cable so that has been replaced and the new one tested. I've got both pedal switchers and the M9 working now but the Timefactor will not respond. I have double checked that the GCP and Timefactor are both set to channel 2 but I cannot get the Timefactor to switch presets via ...
- Tue Dec 11, 2012 9:18 am
- Forum: Racks, Switching Systems and MIDI
- Topic: GCP, Pedal Switchers, M9 and Timefactor
- Replies: 5
- Views: 4018
Re: GCP, Pedal Switchers, M9 and Timefactor
OK, both pedal switchers are working now. I swapped one of the MIDI cables and have the first two units in the signal chain working. I am taking a linear approach to problem solving the rest of the signal chain. Next in line is the M9. I have it set to MIDI channel 1. Are there any settings that I n...
- Mon Dec 10, 2012 6:33 pm
- Forum: Racks, Switching Systems and MIDI
- Topic: GCP, Pedal Switchers, M9 and Timefactor
- Replies: 5
- Views: 4018
Re: GCP, Pedal Switchers, M9 and Timefactor
No, the signal chain appears to be dead after the first Pedal Switcher.
- Mon Dec 10, 2012 4:16 pm
- Forum: Racks, Switching Systems and MIDI
- Topic: GCP, Pedal Switchers, M9 and Timefactor
- Replies: 5
- Views: 4018
GCP, Pedal Switchers, M9 and Timefactor
Hi All, Brand new member and also new to the world of MIDI. I've been doing a ton of reading both here and elsewhere so I am starting to get my head wrapped around the concepts. I have been working toward a MIDI rig for a couple of months, I have two pedal switchers on my pedalboard and just purchas...