Voodoo Lab

bettsaj Watching the video, I noticed something. I think the U shaped "Patch Jack" are made similarly to mine solution, but in reverse. The ground is folded over the TIP terminal, not under like mine. I may be "space out", but I think that's it! John, I live in a small town in Brazil, you can not im...

The amount of unshielded cable is about the same on a 1/4 TS plug with plastic tubing or pedal connectors like ones below. About 1.5cm of unshielded cable this is not enough to act as antenna for RF emissions below 20GHz. Signals with very high intensity may interfere, but they will also interfere w...

Hi there I made my self a "Patch Cables U" to link GCX loops. I used a ordinary 1/4 TS plug, bend 90 degree the ground contact and solder it together, jump the TIP over with a short wire. It's very easy, cheap and quickly to be made, see the pics. Mooer sell something like this but i dont know if it...

Hi

I want to work around to build custom functions!

Luciano S. T.

Hi

I am wondering if you guys, from Voodoo Lab, plan provide the Ground Control PRO source code in a open source license?

Cheers
Luciano S. T.

Hi Absolutely, I know that I can add the Xpression as a ordinary MIDI device (that's how it's today), but I think for my case do the Xpression go through as GCX2* is the better choice. If Xpression assume the role of a GCX2 I'll need to make the MIDI assigns only in the Xpression then the GPC will a...

JohnClark wrote: I can help with the GCX portion.
...
I hope that helps!

Thanks JohnClark, helped a lot, you explained enough!

I will make some tests and back again...

[]´s
Luciano S. T.

Sorry for my bad english! Apologies for my confused post! I'll try to be direct! I want to my GCP recognize a Rocktron Expression as an additional GCX, yes. Although they are different manufacturers, be a multi-loop switching device or a Multi-FX unit is irrelevant, because both devices communicate ...

It's is more a technical issue then operating!

It's a simple matter of properly configuring your Ground Control Pro. When you add the second GCX, you will have to enable it in the GCPro, after which you will program your GCPro presets to send whatever MIDI information you desire to GCX1 and/or to GCX2. See Pages 10 and 11 in the Ground Control ...