Voodoo Lab

OMNI mode simply means your Blackstar's default state is to receive and respond to MIDI information on all 16 MIDI channels. You will still have to program your GCPro to tell it what you want it to do. It might be best to configure your Blackstar as Device 1 on your GCPro using Channel 1, then conf...

Well I sent it back because it had to be something with the midi card. I got a Blackstar Series One 1046L6 which seems like it's easier to control. It's set to OMNI mode in it's stock form. So if I use the 4 Preset mode w/ IA buttons, in OMNI will it just change channels ie (1 clean, 2 crunch, 3 OD ...

Ok so I programmed as follows and it's giving me MAJOR problems. I have the first 4 IA buttons on the GCP to control the 4 pedals in the GCX, the amp's boost as IA 5, Timeline as 6, Big Sky as 7, and Timeline Tap as 8 (no problems with this). My problem is when I save presets on the bottom 4 Preset ...

Thanks for the info! Ya that's what I figured after I read the manual a little more thoroughly!

Thanks for the info midifail, I had another question though. I'd want to send program changes via the bottom 4 buttons on the ground control pro as amp presets (clean, crunch, rhythm, lead) and use the other 8 buttons as IA buttons. I'd want to send program changes to the Strymons as well with the p...

OK so I went with a Timeline and a Big Sky from Strymon. I want to be able to change channels on the Legacy as well as use the boost and reverb as instant access buttons and change presets on the Timeline and Big Sky via Ground Control pro via MIDI. The other pedals will be in the loops of the GCX. ...

Hello, I'm new here and had a few questions. I am thinking of putting together a Midi Rig consisting of a 3 channel Carvin Legacy 3, a GCX, and a GCP to control everything. I'd want to control a Strymon Timeline Via Midi in the amps effects loop as well as a Hardwire Supernatural or a Strymon Big Sk...