Voodoo Lab

nope, that´s all the gear that i have left.
thank you so much!!

hi guys!! it´s been a long time!! i sold most of my equipment, i only have left the line6 pod pro xt and my poweramp marshall el 34 50/50, and my two cabs. (and of course voodoo guitar switcher) i need to control these and get the best sound out of it, im saving for the axe fx III, so this is a mid ...

Judging from a picture of the back panel I'd say you would want to use the Line Level Input, and one of the Unbalanced Analog Out jacks. You may need to change some settings in the POD to get the Line in to work and to disable any Speaker Simulation. I hope that helps! thank you so much. i´ll look ...

hi guys: i´m having problems with my pod pro xt, i can´t get a right sound out of it, maybe i´m not setting this up ok, not sure even looking into the users guide of my pod which is the right input or output to use. the loop goes like this: ada mp1 G major pod pro xt each one of these goes to the gc...

thank you so much!!
i´ll try this on the weekend.
i´ll let you know if a have some trouble...i hope not!!!

thaks again!!

i need the best way to switch my gear to get some great sounds.
my rack goes like this:

Marshall El 34 50/50 poweramp
ada mp1
tc electronic G major
pod pro xt
gcx audio switcher
ground control pro
ernie ball vp junior 250k
wah pedal

thanks a lot!! as always.

greetings from Chile!!

Oh and on the 1074, I think you may want to use the 1/4" Key Input jack on whichever channel you are using rather than the XLR Input jack. 1. GCX Loop 3 Send to DBX 1074 Channel 1 Key Input. 2. DBX 1074 Channel 1 Output to GCX Loop 3 Return. I think you will also want to turn On the "Key" button as...

Oh and on the 1074, I think you may want to use the 1/4" Key Input jack on whichever channel you are using rather than the XLR Input jack. 1. GCX Loop 3 Send to DBX 1074 Channel 1 Key Input. 2. DBX 1074 Channel 1 Output to GCX Loop 3 Return. I think you will also want to turn On the "Key" button as...

Oh and on the 1074, I think you may want to use the 1/4" Key Input jack on whichever channel you are using rather than the XLR Input jack. 1. GCX Loop 3 Send to DBX 1074 Channel 1 Key Input. 2. DBX 1074 Channel 1 Output to GCX Loop 3 Return. I think you will also want to turn On the "Key" button as...

JohnClark wrote:Maybe this will be easier to follow...

thank you so much!!