Voodoo Lab

the 7 pin on the GCP got me. I have now marked the correct orientation of the cable to the GCP and it is working. Good thing I didn't scrap the other midi cable. All good now. Lesson learned and hopefully someone can learn from my mistakes.

that different midi cable does not power the GCP now from the GCX. I am seeing a very faint lighting of the GCP and when I unplug the cable, it goes away. I wonder if the GCX is going south. Very frustrating.

It looks to be the midi cable from the GCP to the GCX. Even though it carries the midi as expected, it would not carry the voltage. I got another midi cable and it is working for now.

thanks for the reply.

I am not able to get the phantom power form the GCX to power the GCP. The GCP powers on it's own voltage and the GCX shows active. I have the GCP setup for the GCX to be on also. I am either missing something or the GCX is not working right. The GCX powers up as expected with the flashing lights and...

The aha moment was when I reset the GCP. I then reloaded the problem GCP SYX fro Sweetwater and got the same issue. Reading the manual, I noticed that there were designations in the 'LOOP' specification but not on my GCP. Once I figured that, all was good. I have had the GCP for a couple months now ...

My issue is this, I can't figure out how to turn off the loops on the GCX once a patch has been selected. The preset GCX assignments work as I mentioned. When I edit the patches to enable or disable the loops, they work as expected. After I save the patch, the buttons for the loops do not turn the ...

My issue is this, I can't figure out how to turn off the loops on the GCX once a patch has been selected. The preset GCX assignments work as I mentioned. When I edit the patches to enable or disable the loops, they work as expected. After I save the patch, the buttons for the loops do not turn the ...

I think the GCP and GCX are setup correctly. I am wondering if I got a bad GCX. I have all of the GCX patches set to Normal and not momentary in the GCP setup. I have the GCP and GCX talking to each other without issue. The programmed presets work as entered for each patch with the selected loops ac...

...with the current Ground Control Pro software... What is this?? I didn't see any downloads on the Voodoo website, but I did stumble across a little utility on http://www.sense-electronics.nl/ - is that what you mean, or is there some better utility for editing the GCP? (btw, I'm using an Eleven R...

I am new to the Eleven rack system and trying to get it working 100% with the GCP. The Eleven patch list for what looks like user presets goes to Z4 which is patch 103 There are additional patches with the lowercase alpha chars. They start at patch a1 on the Eleven Rack. I may have missed it, but is...