Page 1 of 2
Current Touring Rig
Posted: Sun Oct 25, 2009 1:52 am
by Mr. T
Hey guys - here's my current touring rig snapped at a radio session yesterday. I'm waiting on a combined head / rack case. cab is a bogner 412 w/ v30's. GCX was modified with hardwired loops, a custom front-panel interface and blue LED's. It's a versatile and great sounding set-up with a relatively small foot print.
cheers
tommy
Re: Current Touring Rig
Posted: Sun Oct 25, 2009 5:52 pm
by Trueman
Looks great, Square 1 mod to the GCX?
Re: Current Touring Rig
Posted: Tue Nov 03, 2009 2:04 am
by Mr. T
Well spotted, man! Yeah Jason did some mods to my GCX. All the outboard connections are bought out-front turning the front panel into an interface. There's a locking input for the guitar, XLR connection for the GC Pro and sends/returns to the amp FX loop and to the tuner, which i have in loop one on a send only for silent tuning and so i don't have to have the tuner in-line when it's not being used. Loops 1-3 and 4-8 are hard wired together so i can still run some fx (OD's etc) in front of the amp and everything else in the loop. Oh, and there are blue LED's!
T
Re: Current Touring Rig
Posted: Sat Mar 13, 2010 10:02 pm
by ihave27frets
What type of locking plug was put in that GCX for the guitar cable?
Re: Current Touring Rig
Posted: Mon Mar 15, 2010 1:13 pm
by The Blue Letter
do you have any close up pics of the front panel of the modded GCX. I am really curious about this. Thanks a lot.
Dan
Re: Current Touring Rig
Posted: Thu Mar 18, 2010 3:33 am
by Mr. T
here's a shot of the modded GCX before the outputs were labeled. The far right ones go to the send and return of the amps fx loop and the other two nearest the camera are a tuner send and the main send to the amp input. Loops 1-3 are hardwired for pedals that sit in front of the amp and loops 4-8 are hardwired for stuff that sits in the amps loop. Oh, and the LED's are blue!
Re: Current Touring Rig
Posted: Fri Mar 19, 2010 7:06 am
by The Blue Letter
Hey thanks for the pic. It looks great! I have modded all the LED's on my GCX's too.
So the two Thru jacks are sends to your tuner's input, and to the input on your amp?
and then the two jacks at the opposite end are your send and return for your effects loop? Just wanted to make sure I understood... Thanks again for sharing.
Re: Current Touring Rig
Posted: Sat Mar 20, 2010 1:17 am
by Mr. T
Re: Current Touring Rig
Posted: Fri Apr 30, 2010 5:44 pm
by skip
man my little pedalboard seems so small now
Re: Current Touring Rig
Posted: Wed May 12, 2010 7:09 pm
by Bob Barcus
Cool Job Where did you get the Audio cable jacks from They cool real pro