ISO-5 & POG

[archaos]

Hi,

I'd like to know if the ISO-5 18V output is able to power the ehx POG

[JohnClark]

Unless someone here can measure the actual current draw of the POG accurately and report back, the answer for now will have to be no based on the data I can get a hold of for the POG.

[Krust]

Hi,


I measured this yesterday it draw 18V and 220Ma.

[JohnClark]

And with that the answer has to stay at no... the ISO-5 18V output is limited to 150mA.

The Pedal Power 2+ with a Voltage Doubler cable connected to outputs 5 and 6 and the DIP switches set to Normal would be enough to power the POG.

I hope that helps!