IS there Enough Power to run this

[zipnla]

I have a Line 6 wireless unit needing 9v and 350 Ma to run. Also trying to power a TC Helicon needing 12v and 400 Ma. Is it possible to power these and how would I wire it up and where would the DIP switches be set? Thanks in advance.

[Rez]

Yes (the actual current draw of the TC is less than 250mA).

To power the TC-Helicon with Pedal Power 2 Plus, use output 5 or 6, DIP switch in the 12V (away from normal) setting with one of the all black (standard polarity) cables supplied.

To power the Line6 wireless with Pedal Power 2 Plus, use a Current Doubler Adapter, part# PPAP in outputs 4 and 5 (or 6 and 7), DIP switches set normal (9VDC) with one of the all black (standard polarity) cables.


Cheers!