pedal power 2 and 18v pedals

[ryrysweetiepie]

so i'm trying to decided how many 18v twin cable things to order for my pedal power 2 plus.

here are the pedals in question.

-fulltone fulldrive 2 mosfet
-fulltone ocd
-homebrew electronics frostbite flanger
-diamond memory lane 2

i ask because i know some of these pedals, while 18v, still need more than just an 18v split cable. ex, reverse polarity, and some other stuff that i don't really understand.

can anyone help me on this?

[ryrysweetiepie]

oh and one more thing. i have a 535q dunlop wah. i'm pretty sure it says its 9v on the thing. but i've read that its actually 18v? are there two versions?

[JohnClark]

The OCD and Fulldrive 2 can each be powered at 18V using our 18V Y cable connected to any two Pedal Power 2+ outputs set to Normal. The Memory Lane can be powered using EDIT: a Reverse Polarity 18V Y cable but requires using outputs 5 and 6 with the switches set to Normal. The Frostbite will require a reverse polarity 18V Y cable and can be powered using any two outputs set to Normal.

You would be using all eight Pedal Power 2+ outputs with four 18V pedals connected this way. It can be done, but unless you are willing to run one of the Fulltone pedals at 9-12V, there will be no room for the 535Q. There are two versions of the 535Q, if yours says its 9V, then 9V it is.

[ryrysweetiepie]

thanks alot for the in depth help.

[ryrysweetiepie]

ok, are you sure the memory lane can be powered using the 18v y cable? or is it the 18v reverse polarity y cable

[JohnClark]

Would you look at that... it is Center Positive. You are correct, and the Memory Lane will require a Reverse Polarity 18V Y Cable.

[mretfaster]

I power my 18v 535q with the 4th channel of the Pedal Power 2 dip switch normal. That channel, according to pedalpower, is a 9v 100mA channel. It works fine. Never Had a problem.
I Also power the electro harmonix HOG with the 5 or 6 switch up. Works fine! Both!! NEVER had a problem!