Moog, Line 6, Strymon, others
Posted: Sun Jun 06, 2021 10:59 am
Hi All,
New member - learning more, yet still challenged. I poked around for answers before posting, but still a little unsure and, of course, don't want to fry anything!
I am putting together a board that will rotate a few things in and out, but more or less will be the same "footprint" and power needs. Currently, I have a Voodoo Lab "Pedal Power AC" that is handling a couple Beigel Sound Lab pedals and works great. From there, a handful of 9v negative pedals (some higher current, some not.) More on that in sec...
I would like to also like to power up to 3 Moogerfoogers (Murf, RingMod, FreqBox, etc.) at a time. Up to 3 Strymons (El Capistan, Deco, Flint, etc.) at a time. A Line 6 DL-4 (says 9 volt negative, but 1200ma?). A Warm Sound Jet phaser (18v neg). And, a couple EHX's - Ravish Sitar and B9 organ.
Trying to sort what else is needed - looking at Pedal Power 3+ (or Mondo?) Hoping that I can power a lot of the "regular 9v" pedals in a daisy chain either off the courtesy plug and/or some of the 9v ports on whichever unit. I realize I am not being too specific here - lots of swapping and I think the higher current 9v outlets can support multiple pedals chained together (Morley Fuzz Wah, Buddha Wah, Visual Volume, Boss Tuner, 3 or 4 others.)
Also, I believe, for the Moog stuff, I need reverse polarity cables, correct? Are these the correct ones:
http://www.voodoolab.com/shop/index.php?cPath=22_24_29
Also, perhaps, I can run the Line6 through the courtesy plug and solve that problem (assuming I can chain the "regular" 9v stuff).
Any recs as to which Pedal Power(s) needed and such would be greatly, greatly appreciated! Thanks for looking!
Cheers,
B
New member - learning more, yet still challenged. I poked around for answers before posting, but still a little unsure and, of course, don't want to fry anything!
I am putting together a board that will rotate a few things in and out, but more or less will be the same "footprint" and power needs. Currently, I have a Voodoo Lab "Pedal Power AC" that is handling a couple Beigel Sound Lab pedals and works great. From there, a handful of 9v negative pedals (some higher current, some not.) More on that in sec...
I would like to also like to power up to 3 Moogerfoogers (Murf, RingMod, FreqBox, etc.) at a time. Up to 3 Strymons (El Capistan, Deco, Flint, etc.) at a time. A Line 6 DL-4 (says 9 volt negative, but 1200ma?). A Warm Sound Jet phaser (18v neg). And, a couple EHX's - Ravish Sitar and B9 organ.
Trying to sort what else is needed - looking at Pedal Power 3+ (or Mondo?) Hoping that I can power a lot of the "regular 9v" pedals in a daisy chain either off the courtesy plug and/or some of the 9v ports on whichever unit. I realize I am not being too specific here - lots of swapping and I think the higher current 9v outlets can support multiple pedals chained together (Morley Fuzz Wah, Buddha Wah, Visual Volume, Boss Tuner, 3 or 4 others.)
Also, I believe, for the Moog stuff, I need reverse polarity cables, correct? Are these the correct ones:
http://www.voodoolab.com/shop/index.php?cPath=22_24_29
Also, perhaps, I can run the Line6 through the courtesy plug and solve that problem (assuming I can chain the "regular" 9v stuff).
Any recs as to which Pedal Power(s) needed and such would be greatly, greatly appreciated! Thanks for looking!
Cheers,
B