Pedal Power 2 plus w/ 3 high current requirement pedals

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
SpainK27
Posts: 1
Joined: Mon Aug 15, 2022 9:42 am

Pedal Power 2 plus w/ 3 high current requirement pedals

Post by SpainK27 »

I just purchased the Boss RC-500 to start looping. I already have a Strymon Blue Sky and a Boss DD-20 Giga Delay which both require the 5 or 6 inputs on the voodoo labs pedal power 2 plus. In order to power the RC-500 I need to order a current doubler and connect it to either the 4/5 or 6/7 inputs. Is there any way to power all 3 of these pedals with the voodoo labs pedal power 2 plus? Could I order another current doubler and power one of the other pedals with 2 of the lower current inputs?

Rez
Posts: 684
Joined: Thu Sep 01, 2011 10:31 am

Re: Pedal Power 2 plus w/ 3 high current requirement pedals

Post by Rez »

Yes.

To power the Boss RC-550, use a Current Doubler Adapter, part# PPAP in outputs 4 and 5 (or 6 and 7), DIP switches set normal (9VDC) with one of the all black (standard polarity) cables.

And, to power the Blue Sky use a Current Doubler Adapter, part# PPAP in any two outputs, DIP switches set normal (9VDC) with one of the all black (standard polarity) cables.

Cheers!
Cheers,
Ben Resnick
Voodoo Lab - Tech Support

Post Reply