H9 power cutting out from PP3+
Posted: Tue Sep 20, 2022 7:20 pm
Greetings!
I'm having an issue where my H9 is intermittently losing power from my pedal power 3+. This doesn't happen when I have it plugged in to the recommended Eventide power supply. With the PP3+, I'm using the black-to-red cable with the red end in the H9, and I'm even using a current doubler from two of the 500mA 9VDC outputs so in theory it's receiving 1000mA of juice which should be more than enough.
Could the entire PP3+ unit may be past its limit? Here's the list of what it's powering:
- Eventide H9: 500mA (9VDC)
- Empress ZOIA: 300mA
- Strymon Timeline: 300mA
- Strymon Nightsky: 300mA
- Strymon Deco v2: 300mA
- Strymon Sunset: 250mA
- RJM MEGX: 200mA
- Fairfield Accountant: negligible
- Boss TU-3: 55mA
Total: ~2.2A
Would this be an issue? Am I better off powering the H9 out of the 12v output instead?
Any guidance or suggestions would be greatly appreciated!
Many thanks,
Lloyd
I'm having an issue where my H9 is intermittently losing power from my pedal power 3+. This doesn't happen when I have it plugged in to the recommended Eventide power supply. With the PP3+, I'm using the black-to-red cable with the red end in the H9, and I'm even using a current doubler from two of the 500mA 9VDC outputs so in theory it's receiving 1000mA of juice which should be more than enough.
Could the entire PP3+ unit may be past its limit? Here's the list of what it's powering:
- Eventide H9: 500mA (9VDC)
- Empress ZOIA: 300mA
- Strymon Timeline: 300mA
- Strymon Nightsky: 300mA
- Strymon Deco v2: 300mA
- Strymon Sunset: 250mA
- RJM MEGX: 200mA
- Fairfield Accountant: negligible
- Boss TU-3: 55mA
Total: ~2.2A
Would this be an issue? Am I better off powering the H9 out of the 12v output instead?
Any guidance or suggestions would be greatly appreciated!
Many thanks,
Lloyd
