Voodoo Lab

Hi there,
will my trusty pp2 power the following units:

line 6 dl4 - if so which outlet- mini switch in which position and which cables?
electro harmnix 16 sec delay reissue - which outlet, mini switch position, which cables?

graham
belleville ontario canada

The DL4 can be powered from either of the "L6" outputs (output 5 or 6 with the corresponding DIP switch set away from Normal) using the supplied PPL6 cable with the single red end. An example of this is explained in the Pedal Power 2+ manual in the "Line6 Modeling Pedals" section.

The 16 Second Delay should be able to be powered from any Pedal Power 2+ output with the corresponding DIP switch set to Normal using the included 1/8" Mini Plug cable.

Good Luck!