Voodoo Lab

Hi! I have a PP2+ that's already powering an Eventide Time Factor through outputs 5 and 6 with a current doubler cable and would like to add a Strymon Lex to my setup. Is it possible to run another current doubler cable through two of the other outputs to feed the Strymon?

Thanks!

I am unsure if you would have enough current to power the Lex, but you can certainly try it out with the Current Doubler cable you already have. Be sure to leave the DIP switches for the two outputs used in the Normal position.

Let us know what you find!

Bump. I'd really like to know if you can power the eventide and the strymon from one PP2+.

-G

With Pedal Power 2 Plus, either the Eventide or Strymon will need to use its adapter connected to the AC courtesy outlet.

Also, You can power them both with Pedal Power Digital.