Voodoo Lab

Can the PP2+ power a X2 XDS-Plus wireless receiver, using one of the L6 outputs with the DIP-switch set to ON?

According to the specs the XDS-Plus needs 9V / 300 mA. A pro rackbuilder states that using output 5 or 6 on the PP2+ with the DIP-switch set to ON (resulting in higher voltage and higher amperage) works without any problem. I'd be happy with that but I need confirmation.

If so, does this also work with the PP2 (not the Plus)?

I'll answer my own question: yes it does!

I set the DIP-switch on output 6 on a PP2 (not a Plus) to ON. It may not be 9V, it may not be 300mA, but the X2 XDS-Plus runs without problems!

If it works with a PP2, it'll probably work with the PP2+ as well.