Pedal Power AC
-
1meanplexi
- Posts: 10
- Joined: Sat Mar 11, 2017 7:20 pm
Pedal Power AC
I have my rig built and it is fantastic. I need to know if I can use the Pedal Power AC to power my ISP Decimator Pro Rack G and the GCX switching system? Sick of the wall warts falling out. Thanks in advance for your answers.
Re: Pedal Power AC
Yes, a Pedal Power AC can power both of these, no problem.
The Decimator ProRackG can be powered from any 9V Output on the Pedal Power AC.
The GCX can also be powered from any 9V Output on the Pedal Power AC, but if it it providing Phantom Power to a Ground Control or Ground Control Pro, it should be powered from one of the higher current 9V outputs to the right.
Alternatively, a little bit of Dual Lock and/or a small right angle bracket can be used to hold a wall wart adapter in place.
I hope that helps!
The Decimator ProRackG can be powered from any 9V Output on the Pedal Power AC.
The GCX can also be powered from any 9V Output on the Pedal Power AC, but if it it providing Phantom Power to a Ground Control or Ground Control Pro, it should be powered from one of the higher current 9V outputs to the right.
Alternatively, a little bit of Dual Lock and/or a small right angle bracket can be used to hold a wall wart adapter in place.
I hope that helps!
------------------====Cheers!====------------------
---------==Voodoo Lab Magician & Tech==---------
---------==Voodoo Lab Magician & Tech==---------
-
1meanplexi
- Posts: 10
- Joined: Sat Mar 11, 2017 7:20 pm
Re: Pedal Power AC
You are the best John. Thank you.