Page 1 of 1
ISO-5 & POG
Posted: Fri Dec 04, 2009 3:48 pm
by archaos
Hi,
I'd like to know if the ISO-5 18V output is able to power the ehx POG
Re: ISO-5 & POG
Posted: Fri Dec 04, 2009 5:56 pm
by JohnClark
Unless someone here can measure the actual current draw of the POG accurately and report back, the answer for now will have to be no based on the data I can get a hold of for the POG.
Re: ISO-5 & POG
Posted: Tue Jan 18, 2011 3:19 am
by Krust
Hi,
I measured this yesterday it draw 18V and 220Ma.
Re: ISO-5 & POG
Posted: Wed Jan 19, 2011 6:33 pm
by JohnClark
And with that the answer has to stay at no... the ISO-5 18V output is limited to 150mA.
The Pedal Power 2+ with a Voltage Doubler cable connected to outputs 5 and 6 and the DIP switches set to Normal would be enough to power the POG.
I hope that helps!