Voodoo Lab

Hi all,
is there a cable that converts from the 2.5mm barrel outlets on Voodoo Lab's PPAC into the 4-pin 9vAC input on the System Mix Plus?

The power pack supplied with the unit is taking up the space of two IEC outlets on my power strip! GAH!

Cheers -- Dawesy

I just got a PPAC to power my GCX's and the cables to power them from the site, so you should be able to do the same for the System Mix Plus.
Hope that helps.
Cheers!
Dan

I had a look online but I couldn't find it, mostly barrel-to-barrel cables..

The four pin end looks like something you'd see on a Midi cable, just with less pins.

yeah it's a 4 pin din connector. They don't show a pic of it on the site, but you can order the ends and the cables straight from Voodoo Lab, and make the cable yourself to the length that you want it, or you could just have them make the cable for you. Just give them a call. They are very helpful, and will get you what you need.

Ah, i get ya now.
Cheers heaps man, will do -- thanks for the heads up!!

Hey no problem. Glad I could help. Good luck