Can ISO-5 power these?

Exchange tips and tricks to help you design the ultimate pedalboard.
Post Reply
Cajun Queen
Posts: 4
Joined: Thu Jan 07, 2016 5:23 pm

Can ISO-5 power these?

Post by Cajun Queen »

Hi all. Very much a newbie to both pedals *and* power supplies.
Santa brought me these 4 pedals. Does ISO-5 look appropriate? Should I be looking at something else?

Diamond J-Drive -- (I think 12ma at 9VDC)
EHX Soul Food OD -- (I think 22ma at 9.6VDC)
EHX Holy Grail NEO Reverb (not Nano Reverb) -- (I think 75ma at 9.6VDC)
EHX Memory Toy (not BOY) Delay -- (I think???? 25ma)

This last EHX pedal has this unusual note in the documentation:
"Comes supplied with a 9 volt battery. WARNING: When using a power adaptor, use only a 96DC-200BI. Do not use any other adapters. Using other adapters, even those made by EHX, could harm the unit."

But that adapter that's mentioned is the exact same one that powers the first two EHX pedals, so I'm guessing/wondering that this comment in the documentation is overly cautious or perhaps outdated.

Any comments advice *much* apprec. :)

JohnClark
Posts: 7494
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Can ISO-5 power these?

Post by JohnClark »

Right on Santa!!

The J-Drive, Soul Food, and Holy Grail NEO can each be powered from any 9V output on an ISO-5.
The Memory Toy should be powered from the High Current 9V output on an ISO-5.

I hope that helps!
------------------====Cheers!====------------------
Image
---------==Voodoo Lab Magician & Tech==---------

Cajun Queen
Posts: 4
Joined: Thu Jan 07, 2016 5:23 pm

Re: Can ISO-5 power these?

Post by Cajun Queen »

wow, thanks. This forum is *awesome*.
Thanks again for the prompt response. Really apprec.

Post Reply