Hello everyone:
I just added a Strymon Mobius, a Boss DD500 and the PX8-Plus to my rig. Is it necessary to use something like MIDI Solutions' Quadra Thru between the PX8-Plus and those pedals? I'm new to all 3 devices and using MIDI to call up custom presets in the 2 pedals.
Any thoughts, advice, etc. would be greatly appreciated.
My thanks in advance.
PX8 Plus & MIDI
Re: PX8 Plus & MIDI
Sorry for the delayed reply!
It isn't typically necessary to need a MIDI splitter to run multiple MIDI devices.
You could easily run these chained in series via MIDI. The only thing is to be sure to set the MIDI Out of your effects to act as a MIDI Thru, before connecting it to the MIDI In of the next effect. This will make it that each device will see the same message generated by the PX-8 Plus preset.
I hope that helps!
It isn't typically necessary to need a MIDI splitter to run multiple MIDI devices.
You could easily run these chained in series via MIDI. The only thing is to be sure to set the MIDI Out of your effects to act as a MIDI Thru, before connecting it to the MIDI In of the next effect. This will make it that each device will see the same message generated by the PX-8 Plus preset.
I hope that helps!
------------------====Cheers!====------------------
---------==Voodoo Lab Magician & Tech==---------
---------==Voodoo Lab Magician & Tech==---------