Voodoo Lab

Hi, I'm having a problem powering my RC-30. After reading through the manual I used port 5 and 6, and tried dip switch and normal, and away. No luck. For kicks I tried 1-4, and no dice as well. I've read a few threads about getting a Y doubler, but it seems like overkill. Not sure if I would need the voltage doubler, or current doubler.

I've also tried different barrel plugs; they power my other pedals fine, just not the RC-30. I don't have an actual boss adapter to verify the port on the pedal is still good. But it does work fine with batteries.

Any advice??

Michael

Not too sure what the problem would be here... the RC-30 should be completely fine to power from output 5 or 6 with the corresponding DIP switch set to Normal using one of the included standard all black Barrel cables. Common for Boss pedals would be that you also have to have a guitar cable connected to the Input jack before the pedal will power up.


Let us know what you find!