Hey everyone =)
First, I've been using VL products for fifteen years now and they have never let me down - Great work @VL =)
I'm about to put together a Dingbat small, I need to power my L6 HX stomp (in addition to a vintage DynaComp, MXR M300 and a Nano POG) and the VL 4x4 is simply to big/heavy for this board, so I wonder if is it possible to mount a Truetone powersupply (CS6 low profile) under the board?
Cheers =)
Dingbat small and powersupplys
Re: Dingbat small and powersupplys
I don't know for certain what else will fit under our boards, sorry.
A Pedal Power Digital or the new Pedal Power X4 could be made to work for these pedals.
The HX Stomp would need to use two 9V Outputs combined with a Current Doubler Adapter (the one with the Green end).
The M300 would use any single 9V Output.
The Nano POG and DynaComp could both be powered from the remaining 9V Output using an Output Splitter Adapter.
A Pedal Power Digital or the new Pedal Power X4 could be made to work for these pedals.
The HX Stomp would need to use two 9V Outputs combined with a Current Doubler Adapter (the one with the Green end).
The M300 would use any single 9V Output.
The Nano POG and DynaComp could both be powered from the remaining 9V Output using an Output Splitter Adapter.
------------------====Cheers!====------------------
---------==Voodoo Lab Magician & Tech==---------
---------==Voodoo Lab Magician & Tech==---------
Re: Dingbat small and powersupplys
Cool - thanks fo the advice =)