Ground Control MIDI Foot Controller

somebodyelseuk · Post by **somebodyelseuk** » Sun Sep 25, 2011 4:08 am

Hi. I've been using the Ground Control (not the Pro) since 1998. Other than programming my patches, it's exactly as it left the factory.
My questions -
Is it possible to back it up as you would do with other MIDI devices?
The internal battery must be due for changing by now. Is it the usual 2032 type, will I lose my settings and is it an easy job (ie. is it soldered to the board or held in place with a spring clip?)?

Many thanks

Post by **JohnClark** » Mon Sep 26, 2011 12:42 pm

There is not a way to backup the memory on the original Ground Control.
The memory used in both the original Ground Control and the Ground Control Pro does not require a battery so at least you don't have to worry about that part!

somebodyelseuk · Post by **somebodyelseuk** » Tue Sep 27, 2011 12:02 am

Thanks for the reply.

I was only concerned about losing settings if I had to renew a battery.

Thanks

Voodoo Lab

Voodoo Lab User Forum

Ground Control MIDI Foot Controller

Ground Control MIDI Foot Controller

Re: Ground Control MIDI Foot Controller

Re: Ground Control MIDI Foot Controller