Hi there.
I am about buying a MIDI Control System to manage all my midi and analogic stuffs. I have heard and lot of good reviews of your beautiful Voodoo Lab GCX but I am not going to waste my behringer FCB 1010. I would love to know if it exists the possibility to use both device together.
Best regards from Canary Island (Spain)
Ibai Argüeso López. :
behringer foot controller FCB 1010 with Voodoo lab GCX
-
isolationfromtherest
- Posts: 1
- Joined: Wed Jul 29, 2009 4:37 am
Re: behringer foot controller FCB 1010 with Voodoo lab GCX
The GCX will respond to control Change messages 80-87 (latching), 104-111 (momentary) on MIDI channel 16. You will need to send all 8 CC messages in order to fully control the GCX with a preset combination of loops. I believe the FCB1010 is limited in the number of Control Change messages it can send so you may not be able to access all 8 loops on your presets. There seems to have been a software update or two for the FCB1010, so it would be best to contact Behringer to find out the capabilities of the software version you are running. Let us know what you find.
------------------====Cheers!====------------------
---------==Voodoo Lab Magician & Tech==---------
---------==Voodoo Lab Magician & Tech==---------