Sorry guys,
I read every manual and alot of these forum posts and I still cant' get the G major 2 to respond to changes from the GC Pro. I have my Marshall 6100LM set to device 1/midi 1 in the GCP and the Gmajor 2 is device 2/midi 2. I also have the G major 2 in Midi 2 as well (in the settings).
I watched a few videos and read the instructions here but cannot get the patches to change. I am missing a crucial step here or something!
GC Pro & Gmajor 2 not communicating
Re: GC Pro & Gmajor 2 not communicating
Here is a test...
1. Recall any Ground Control Pro preset that should control the G-Major 2.
2. Press and hold the Edit button.
3. The first device will show on the screen with the Program Change number you have assigned. According to the above this should be your Marshall.
4. Press the Bank Down button to view the settings for the second device.
5. Using the smaller numbered buttons, type in the Program Change number you want to send to the G-Major 2.
Did the G-Major 2 change to the number you just typed in?
1. Recall any Ground Control Pro preset that should control the G-Major 2.
2. Press and hold the Edit button.
3. The first device will show on the screen with the Program Change number you have assigned. According to the above this should be your Marshall.
4. Press the Bank Down button to view the settings for the second device.
5. Using the smaller numbered buttons, type in the Program Change number you want to send to the G-Major 2.
Did the G-Major 2 change to the number you just typed in?
------------------====Cheers!====------------------
---------==Voodoo Lab Magician & Tech==---------
---------==Voodoo Lab Magician & Tech==---------