Original Ground Control issue

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
Don Grosh
Posts: 4
Joined: Tue Feb 05, 2013 5:43 pm

Original Ground Control issue

Post by Don Grosh »

I just noticed an issue with my Ground Control. When I try to program any patch above #20 it banks back down and won't go into
"Program Device" mode. It has version 2.4 software. Any idea's?

JohnClark
Posts: 7494
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Original Ground Control issue

Post by JohnClark »

Try letting go of the Bank Down button once it scrolls all the way down through the banks then press-and-hold it again to get into the preset edit mode. It will still edit the last preset you were on in the higher bank.

This was a sort of safety so you could hold the bank down button when trying to get back to the bottom without accidentally going into the edit mode while on stage.

I hope that helps!


p.s. Josh's "wrong green" #81 is my favorite guitar... It sounds awesome before you even plug it in!
------------------====Cheers!====------------------
Image
---------==Voodoo Lab Magician & Tech==---------

Don Grosh
Posts: 4
Joined: Tue Feb 05, 2013 5:43 pm

Re: Original Ground Control issue

Post by Don Grosh »

Thanks John, it worked!!

Glad you like Josh's #81! It's hard to believe that guitar is about 20 year's old now, great to hear it's still being enjoyed!

Thanks again!

Post Reply