Source Audio/Orbital modulator

[Legacy]

Yeah JohnClark can help for sure
GCP is set up for 4 presets on the bottom row
I also have set up;
Sourceaudio-Orbital Modulator assigned to channel 1
Tc Electronic-Nova Drive assigned to channel 2
Sourceaudio-Dimension Reverb on channel 3

Up the Irons !!!

[JohnClark]

I think I see what is happening here!

You already have the Ground Control Pro set up to control the Orbital Modulator and the Dimension Reverb independently. If you want to use the Hub to control the pedals as Source Audio Jon is describing, you would want to name the Hub as the only Source Audio device in the Ground Control Pro and delete the pedals.

One thing that is likely currently causing strange behavior from the Hub, if the Hub is still set to Omni Mode, is that you have the Ground Control Pro set to send Program Changes on three different MIDI channels. You would definitely want to set the Hub to receive only on the one MIDI channel you assign to it within the Ground Control Pro.

[Legacy]

I think I see what is happening here!

You already have the Ground Control Pro set up to control the Orbital Modulator and the Dimension Reverb independently. If you want to use the Hub to control the pedals as Source Audio Jon is describing, you would want to name the Hub as the only Source Audio device in the Ground Control Pro and delete the pedals.

One thing that is likely currently causing strange behavior from the Hub, if the Hub is still set to Omni Mode, is that you have the Ground Control Pro set to send Program Changes on three different MIDI channels. You would definitely want to set the Hub to receive only on the one MIDI channel you assign to it within the Ground Control Pro.

Thanks mighty JohnClark

This works partially.
Switching works fine but after i save my tone and when i come back it would recall saved preset only.
OM is set to MIDI
Any idea?

Up the Irons !!!

[JohnClark]

I'm not too sure what you mean by "OM is set to MIDI"...

Your Orbital Modulator and Dimension Reverb should not have any MIDI connections. They will now be controlled using only the Hub's Multi-Function Outputs via the cables that came with the Hub.

[Legacy]

OM is Orbital modulator.
When I mention MIDI I thought about that button that is on the pedal I set on MIDI.

[Strat1983]

This is of no help whatsoever but I like that there are cats in this demo! Nice chorus sounds too.

http://www.youtube.com/watch?v=061Hztmk ... e=youtu.be

[Legacy]

Does HUB needs to be listed under devise on GCP?
Pedals are by factory default on channel 1 do I have to have hub on channel 1 too?
Or I have to set them up all on different channels
Thanks

[JohnClark]

The HUB will be the only Source Audio device you will name in the Ground Control Pro. You can use whatever MIDI channel you want for the HUB as long as it isn't the same one you already use for the Nova Drive.

The Orbital Modulator and Dimension Reverb will have no MIDI connections.