1 GCX - independent rigs

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
c diddy 5000
Posts: 18
Joined: Sat Oct 24, 2009 2:48 pm

1 GCX - independent rigs

Post by c diddy 5000 »

I have been scheming lately to consolidate both my and my wife's pedals and amp switching in one rack while using only one GCX. On paper, I can totally make it work with the number of loops available. My concern in doing this is that I will create some ground loops between the two amp rigs. What do y'all think?

JohnClark
Posts: 7494
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: 1 GCX - independent rigs

Post by JohnClark »

The GCX Loops are all isolated from each other.
As an example, you could have a single GCX switch do one switch function in eight different rigs.

So unless you are sharing pedals between the two rigs, you should be completely fine!
------------------====Cheers!====------------------
Image
---------==Voodoo Lab Magician & Tech==---------

c diddy 5000
Posts: 18
Joined: Sat Oct 24, 2009 2:48 pm

Re: 1 GCX - independent rigs

Post by c diddy 5000 »

JohnClark wrote:The GCX Loops are all isolated from each other.
As an example, you could have a single GCX switch do one switch function in eight different rigs.

So unless you are sharing pedals between the two rigs, you should be completely fine!
That's great to hear. Two bits on good news from you today.

Post Reply