Any Idea What This May Be?

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
ThreeSinsOfSeven
Posts: 2
Joined: Tue Sep 06, 2016 4:31 pm

Any Idea What This May Be?

Post by ThreeSinsOfSeven »

https://youtu.be/AC1WWI-l1iU

It's gotten progressively worse.

a2dconverter
Posts: 75
Joined: Fri Jan 27, 2012 8:32 am
Location: Toronto, Ontario, CANADA

Re: Any Idea What This May Be?

Post by a2dconverter »

It looks like a loose connection or a loose EEPROM

Open up the GCX and make sure that everything is seated correctly... The EEPROM is a big 'chip' with the white sticker in the middle of the circuit board...

Image

I hope this helps

seeya

Joe

ThreeSinsOfSeven
Posts: 2
Joined: Tue Sep 06, 2016 4:31 pm

Re: Any Idea What This May Be?

Post by ThreeSinsOfSeven »

It sure did help! Didn't feel any give when I pushed down on the EPROM... there was a piece of glue floating around one of the connections. In any case, whatever I did, pushing everything tight throughout the board resolved the issue. Thank you SOOOOO much!

Post Reply