For example: I run an EQ [EQ-6 in Loop 4 of GCX-1 and EQ-7 in Loop 4 of GCX-2] in front of each Mesa and would like my EQ pedals to turn On and Off simultaneously. I would also like both Mesas to switch Channels when I step on Loop 7.
Is it possible to assign Instant Access buttons to affect both GCX 1 and 2 simultaneously?
-Reuben-
GCX-1 with Mesa Stiletto Head in the following configuration:
Ground Control Pro: 4 Presets + Instant Access
GCX-1
Loop 1: TS-9 Overdrive
Loop 2: Sparkle Drive
Loop 3: Flange
Loop 4: EQ-6
-Into the front of the amp (Input).-
Loop 5: Rocktron Harmonizer
Loop 6: Eventide Delay
-Into the Effects Loop-
Loop 7: Channel Switching (from Ch1 to Ch2 on Mesa)
Loop 8: Solo Boost On/Off Function (on Mesa)
Not yet successful addition... GCX-2 with Mesa Dual Rectifier Head in the following configuration:
GCX-2
Loop 1: empty
Loop 2: empty
Loop 3: empty
Loop 4: EQ-7
-Into the front of the amp (Input).-
Loop 5: empty
Loop 6: Boss DD-3 Delay
-Into the Effects Loop-
Loop 7: Channel Switching (from Ch1 to Ch2 on Mesa)
Loop 8: empty
