spill over

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
WATRIN
Posts: 1
Joined: Fri Jan 21, 2011 9:47 am

spill over

Post by WATRIN »

Does the GCX allow for delay spill overs, and if so do you need to set it up a certain way or patch it differently? THANKS!

JohnClark
Posts: 7494
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: spill over

Post by JohnClark »

The GCX by itself will not provide this ability, however a GCX loop can be used to mute the input of a delay routed in a parallel effect loop or into a mixer.

I hope this helps!
------------------====Cheers!====------------------
Image
---------==Voodoo Lab Magician & Tech==---------

cjkbug
Posts: 11
Joined: Wed Aug 18, 2010 11:19 am

Re: spill over

Post by cjkbug »

check out the rjm music mini line mixer. I'm using it with my timefactor and wet reverb with fantastic results. and it takes up VERY little space on a board or rack.

Post Reply