Ground control

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
Bahamafornian
Posts: 11
Joined: Sun Mar 07, 2010 9:47 am

Ground control

Post by Bahamafornian »

I had my ground control switching all my pedals in the rack cleanly finally after rewiring everything with george l's.
I recently received a custom pedalboard from pedalboards.com, once I plugged in through the pedalboard I had a lot of humming, so I disconnected the pedal board, and now when I plug in the ground control it does not switch the gcx anymore......
Thoughts?

JohnClark
Posts: 7494
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Ground control

Post by JohnClark »

Not too sure... your audio connections cannot prevent the GCX from responding to the Ground Control Pro. Is the Ground Control Pro receiving phantom power from the GCX? Is the Active LED on the GCX on? Does the Active LED flash when you press buttons on the Ground Control Pro?
------------------====Cheers!====------------------
Image
---------==Voodoo Lab Magician & Tech==---------

Bahamafornian
Posts: 11
Joined: Sun Mar 07, 2010 9:47 am

Re: Ground control

Post by Bahamafornian »

Yes, yes, and yes, only issue now is that loop 8....
Not much you can do from there.

Post Reply