Voodoo Lab

Hello there!

My setup (midi) so far was:

GCP - pedal switcher - Line6 M13

now I want to install a second pedal switcher:

GCP - pedal switcher 1 - pedal switcher 2 - Line 6 M13

The 2nd PS doesn't respond (led/loops). The leds work when I switch them on/off manually on the PS and it passes on signals to the M13 via Midi ...

The cables/connections are ok...

What can I do?

Hi there,
Have you added the Pedal Switchers as Expanders in the GC Pro? Maybe this is what you need to do?

Cheers

Hi,
yes, I enabled it in the setup (expanders)

Hi there,
I’ve just read the pedal switcher manual, the second pedal switcher is actually loop 5 - 8 of GCX 1. Remove GCX no.2 from the expanders and see how you go.

It’s on page 12 of the PDF

http://www.voodoolab.com/manuals/pedal_ ... manual.pdf

Cheers

thanks, that worked! Hiiihaaaaw!