Voodoo Lab

Hey there!

Can I switch the channels on an Engl Fireball (original 60) directly from the gcx/gcp? For your info, the head has one jack out for the footswitch. A on or off = ch1 or ch2 and B on or off = master vol a or master vol b.

Thanks in advance!

You would need an Insert Point cable with the Stereo end connected to the amplifier's footswitch jack and the mono ends each connected to the Out of a GCX loop. One GCX Loop will A/B the channels and the other GCX Loop will A/B the master volume settings. Good Luck!

Thanks Mr. Clark!